• Shop By Department
  • Search
    Filters

    JMac Customs RRD-2C 14F KeyMount (KeyMicro)

    $104.95
    $94.46
    SKU: JC-RRD-2C-14F-KM
    Vendor: MSR
    Manufacturer: JMAC Customs
    Availability: In stock

    JMac Customs RRD-2C 14F KeyMount (KeyMicro)

    (R)ecoil(R)eduction(D)evice(2) ports(C)ompensator(14)14-1LH thread pitch(F)aceMount(KM)KeyMount

    In order to use this device with a suppressor, it must be installed by a professional - to ensure it is properly mounted and aligned. Do NOT shoot without checking alignment with bore rods. JMac Customs is not responsible for any damage to the suppressor, or any injury resulting from improper installation. Some firearms are NOT suitable suppressor hosts, just because you can thread this muzzle device on, does NOT mean it is safe to use.

    The RRD-2C is a shortened version of the RRD-4C by removing the 2 smallest ports creating a more compact package!

    At 2.23" it still adds 1.53" and can be permanently attached to a 14.5" barrel to achieve 16" OAL

    THIS REQUIRES FACE SHIMS OR FACE MILLING TO BE INSTALLED!!

    • 14-1LH Threads
    • KeyMo & KeyMicro Suppressor compatible
    • 10mm Bore
    • 2.23" Long
    • 17-4ph Stainless Steel
    • Black Nitride

    JMac Customs RRD-2C 14F KeyMount (KeyMicro)

    (R)ecoil(R)eduction(D)evice(2) ports(C)ompensator(14)14-1LH thread pitch(F)aceMount(KM)KeyMount

    In order to use this device with a suppressor, it must be installed by a professional - to ensure it is properly mounted and aligned. Do NOT shoot without checking alignment with bore rods. JMac Customs is not responsible for any damage to the suppressor, or any injury resulting from improper installation. Some firearms are NOT suitable suppressor hosts, just because you can thread this muzzle device on, does NOT mean it is safe to use.

    The RRD-2C is a shortened version of the RRD-4C by removing the 2 smallest ports creating a more compact package!

    At 2.23" it still adds 1.53" and can be permanently attached to a 14.5" barrel to achieve 16" OAL

    THIS REQUIRES FACE SHIMS OR FACE MILLING TO BE INSTALLED!!

    • 14-1LH Threads
    • KeyMo & KeyMicro Suppressor compatible
    • 10mm Bore
    • 2.23" Long
    • 17-4ph Stainless Steel
    • Black Nitride
    Write your own review
    • Bad
    • Excellent