• Shop By Department
  • Search
    Filters

    Slip 2000 Copper Cutter 4 Oz Bottle

    $9.99
    $7.99
    See Reviews
    SKU: SLIP-60218-12
    Vendor: MSR
    Manufacturer: Slip 2000
    Availability: In stock

    Slip 2000 Copper Cutter 4 oz Bottle

    Copper Cutter is specially formulated to remove: copper, lead, powder residue and plastic wad fouling from bore surface with very little scrubbing!
    Cleans bores in:
    Rifles
    Shotguns
    Pistols
    Revolvers
    Directions
    Keep the muzzle end pointed down to prevent cleaner from running back into the actions or chambers
    Soak a patch, brush or mop with Copper Cutter and run through bore. Follow this with a dry patch
    Repeat until dry patch come out clean
    After patch comes out clean, it is very important to run a mop or patch with a Slip 2000 Gun Lubricant on it to completely recoat bores with lubricant protection
    Always Relubricate After Cleaning
    Copper Cutter is a Water Based - Ammonia Enhanced product and it will remove all lubricatin or oil protection. Care should be taken to re-lube all parts cleaned with Copper Cutter to rusting. Always follow up with a Slip 2000 Gun Lubricant to displace any moisture left behind from cleaning. This will not only protect your weapon but it will reduce your next cleanup time.

    #TAG# SLIP-6021; SLIP-602; SLIP-60; SLIP #TAG#

    Slip 2000 Copper Cutter 4 oz Bottle

    Copper Cutter is specially formulated to remove: copper, lead, powder residue and plastic wad fouling from bore surface with very little scrubbing!
    Cleans bores in:
    Rifles
    Shotguns
    Pistols
    Revolvers
    Directions
    Keep the muzzle end pointed down to prevent cleaner from running back into the actions or chambers
    Soak a patch, brush or mop with Copper Cutter and run through bore. Follow this with a dry patch
    Repeat until dry patch come out clean
    After patch comes out clean, it is very important to run a mop or patch with a Slip 2000 Gun Lubricant on it to completely recoat bores with lubricant protection
    Always Relubricate After Cleaning
    Copper Cutter is a Water Based - Ammonia Enhanced product and it will remove all lubricatin or oil protection. Care should be taken to re-lube all parts cleaned with Copper Cutter to rusting. Always follow up with a Slip 2000 Gun Lubricant to displace any moisture left behind from cleaning. This will not only protect your weapon but it will reduce your next cleanup time.

    #TAG# SLIP-6021; SLIP-602; SLIP-60; SLIP #TAG#

    Products specifications
    Manufacturer Slip 2000
    Write your own review
    • Bad
    • Excellent
    Existing reviews
    From: | Date: 10/23/2017 4:37 AM
    Was this review helpful? Yes No (0/0)
    Products specifications
    Manufacturer Slip 2000