• Shop By Department
  • Search
    Filters

    MarColMar Firearms CETME L Gen 2 223 Rem / 5.56x45mm Flat Dark Earth Semi-Automatic Rifle

    $1,670.00
    $1,450.00
    SKU: MCM-LFDFDR
    Vendor: MSR
    Manufacturer: MarColMar Firearms
    Availability: In stock

    Can we ship to you

    Cetme L Rifle - FDE Gen 2 with Rail 223 REM

    FDE Furniture, Picatinny Rail, 16.1" Barrel, 30rd STANAG Magazine 5.56/.223 Caliber

    Born from the ashes of WWII, the CETME design group was established in Spain, and staffed by many Mauser employees like Dr. Ludwig Vorgrimler, who brought their research and designs with them.  They would later develop and adopt the CETME C, better known to American shooters and collectors under its German licensed designation: the G3 / HK91 in 7.62x51 / .308.

    Faced with the transition by militaries to the 5.56 in the 1970s, and with their pending entrance into NATO, Spain and CETME began in earnest to develop a 5.56 rifle for their military.  The result was the last roller-locking rifle to be adopted by any military, and the first and only one specifically designed for the 5.56/.223 from the ground up, the CETME L.

    Unlike its German cousin the HK33, it was not a scaled down version of the 7.62 receiver.  A totally new design, the CETME L is thinner and has a smaller form factor.  The CETME L served with Spanish troops through the 80's and 90's, and was used during their service with Coalition Forces during Operation Desert Storm.  The CETME L continues to serve to this day with Spanish Reserve and Police units. 

    MarColMar uses original Spanish surplus parts, a new made in the USA receiver, a cold-hammer-forged and nitrided barrel (1-in-7), brand new US made furniture, all finished with Cerakote, to produce a beautiful new firearm that is now optimized for US STANAG M-16/AR-15 magazines.

    But MarColMar didn't just copy the CETME L, they employed the newest materials and manufacturing processes (like robot welding) to produce a rifle even better than could be built in the 1980's.  The CETME L is now even available with a welded picatinny rail, and in four different Cerakote finishes, original Spanish Green, Black, Grey and FDE.  Eventually CETME LVs and LCs will also be offered to owners of the CETME L.

    • Brand new USA receiver - from a 4 station progressive die - 600 ton press
    • Robot-welded, die-folded receiver
    • 16.1" Cold-Hammer-Forged barrel, chambered in 5.56/.223, fluted to original specs, nitrided, enhanced chamfer for better feeding
    • New USA furniture modeled just like the original Spanish furniture, with upgraded materials - Nylon 6 NOT Polypropelene
    • ATF Approved semi-auto design
    • Mag feed optimized for STANAG M-16/AR-15 Magazines
    • Finished in Cerakote by a certified Cerakote installer
    • 922(r) Compliant using 8 imported parts
    • 1 Year Limited Warranty on parts and workmanship

    Cetme L Rifle - FDE Gen 2 with Rail 223 REM

    FDE Furniture, Picatinny Rail, 16.1" Barrel, 30rd STANAG Magazine 5.56/.223 Caliber

    Born from the ashes of WWII, the CETME design group was established in Spain, and staffed by many Mauser employees like Dr. Ludwig Vorgrimler, who brought their research and designs with them.  They would later develop and adopt the CETME C, better known to American shooters and collectors under its German licensed designation: the G3 / HK91 in 7.62x51 / .308.

    Faced with the transition by militaries to the 5.56 in the 1970s, and with their pending entrance into NATO, Spain and CETME began in earnest to develop a 5.56 rifle for their military.  The result was the last roller-locking rifle to be adopted by any military, and the first and only one specifically designed for the 5.56/.223 from the ground up, the CETME L.

    Unlike its German cousin the HK33, it was not a scaled down version of the 7.62 receiver.  A totally new design, the CETME L is thinner and has a smaller form factor.  The CETME L served with Spanish troops through the 80's and 90's, and was used during their service with Coalition Forces during Operation Desert Storm.  The CETME L continues to serve to this day with Spanish Reserve and Police units. 

    MarColMar uses original Spanish surplus parts, a new made in the USA receiver, a cold-hammer-forged and nitrided barrel (1-in-7), brand new US made furniture, all finished with Cerakote, to produce a beautiful new firearm that is now optimized for US STANAG M-16/AR-15 magazines.

    But MarColMar didn't just copy the CETME L, they employed the newest materials and manufacturing processes (like robot welding) to produce a rifle even better than could be built in the 1980's.  The CETME L is now even available with a welded picatinny rail, and in four different Cerakote finishes, original Spanish Green, Black, Grey and FDE.  Eventually CETME LVs and LCs will also be offered to owners of the CETME L.

    • Brand new USA receiver - from a 4 station progressive die - 600 ton press
    • Robot-welded, die-folded receiver
    • 16.1" Cold-Hammer-Forged barrel, chambered in 5.56/.223, fluted to original specs, nitrided, enhanced chamfer for better feeding
    • New USA furniture modeled just like the original Spanish furniture, with upgraded materials - Nylon 6 NOT Polypropelene
    • ATF Approved semi-auto design
    • Mag feed optimized for STANAG M-16/AR-15 Magazines
    • Finished in Cerakote by a certified Cerakote installer
    • 922(r) Compliant using 8 imported parts
    • 1 Year Limited Warranty on parts and workmanship
    Products specifications
    Caliber 223 Rem
    Caliber 5.56x45mm
    Capacity 30
    Write your own review
    • Bad
    • Excellent

    You can easily buy firearms online from K-VAR Corp! We will ship directly to the Federal Firearm License (FFL) of your choice, just specify which FFL you would like to use, while checking out. Firearms must be shipped to an FFL holder, which is usually any type of business that sells firearms.

    Key Points:

    • There are NO RETURNS on firearms! All Sales Are Final.
    • Firearms MUST be shipped to an FFL Dealer - at checkout you will be able to select one based on your shipping zip code.
    • It is your responsibility to contact the FFL Dealer to ensure they accept firearms transfers. They will also explain their fees and federal, state, and local requirements and fees.
    • After making your purchase, request the FFL Dealer sends a copy of their FFL Dealer License to [email protected] reference your order number. Your order CAN NOT BE SHIPPED without a copy of their FFL.
    • When you pick up your firearm, inspect it to ensure the condition is acceptable before completing the transfer. Once a firearm is transferred, you will have to consult with the manufacturer if there are any defects or warranty matters.
    • Federal law REQUIRES the individual making the purchase MUST be the individual that picks up the firearm from the FFL Dealer.

    Please see How to Buy a Firearm Online for more information!

    Please check your local, state, and federal laws and regulations before placing an order. Some special federal, state, and/or local permissions and/or licenses may be required for some purchases. Please contact your local authorities and/or BATFE for clarifications concerning purchasing and modifications. For further information, please read our complete Terms & Conditions.