Arsenal factory SBR, 7.62x39mm caliber, milled receiver, front sight/gas block combination, 24x1.5mm right-hand threads, muzzle nut, short gas system, OD Green polymer ribbed handguards, stainless steel heatshield, ambidextrous safety, pistol grip, tactical aluminum right side folding buttstock, scope rail. Includes rear QD attachment on both sides, one OD Green 30rd M-47WP Circle 10 magazine, one OD Green 10 round magazine, Bulgarian OD Green Cerakote 4-Piece Flash Hider, Arsenal hard case, cleaning kit, and sling.
This civilian semi-auto version of the Arsenal Bulgarian made Military Special Ops AR-M14SF TACT select fire rifle includes:
- 8.5" chrome lined hammer forged barrel with 24x1.5 RH threads.
- Bulgarian 4-Piece Flash Hider OD Green Cerakote
- Front Sight Block / Gas Block combination.
- Rear QD attachment points on both sides.
- 1 30rd OD Green M-47WP 7.62x39mm Circle 10 magazine.
- 1 10rd OD Green 7.62x39mm magazine
- Mil-Spec sling with QD attachment.
- Cleaning Kit.
- Arsenal hard case with custom CNC machined foam inserts.
- FIME Group Enhanced Fire Control Group FM-922EUS.
Features Arsenal's New CNC Machined Hard Anodized Aluminum Tactical Side Folding Stock
Arsenal's new machined hard anodized aluminum side-folding stock provides better ergonomics and functionality in a lighter and stronger design. It includes two non-rotating QD points on the stock for precise sling attachment. The buttstock body is CNC machined from a single piece of aluminum and hard anodized for strength. The attachment parts are heat treated carbon steel. The stock has a cheek weld groove machined for a better fit. All the parts are machined in house, down to the rivets which are produced in a CNC machine to ensure a flush fit. The attention to detail and manufacturing the parts in house has produced a high quality stock with tight tolerances, that's built to last.
Arsenal’s Exclusive Milled and Forged Receiver
Each receiver is milled from a hot-die hammer forged receiver blank by the Arsenal Co. of Bulgaria. Arsenal’s hot-die hammer forging produces stronger and finer-grained steel. Internal voids and cooling deformations are eliminated by the 5-ton hammer forging process.
Each forged receiver blank requires over 5.5 hours of milling before assembly. This forging and milling process is complex and time-intensive, but Arsenal’s meticulous attention to detail delivers a receiver of unequalled strength, precision, and durability.
Arsenal Hard Case with CNC Hard Foam and TSA Locks
Arsenal Custom Hard Case for AR-M14SF-TACT. The interior is lined with CNC machined hard foam custom designed to fit AR-M14SF-TACT Rifles.
It's designed with cut outs for two 30rd (1 inserted in the rifle) & one 10rd magazines, sling, 20rd box of ammo, cleaning kit and oil bottle.
The case is fabricated with aluminum reinforced corners and edges to maximize impact resistance. The combination locks include TSA locks to ensure compliance with TSA regulations. The Arsenal logo is proudly displayed on the top of the case.
CAUTION: Hot metal may affect the foam lining! Ensure your firearm has time to cool prior to storage.
Instructions for setting the combination code:
- Set all dials to default code of “0”
- Undo locking latches and open case
- On the inside of the locking latch, push the small switch down away from the top of the locking latch until it clicks into place
- While switch is clicked down, simultaneously set code on locking latch
- After setting new code, push the switch back up to click into the original position
- New code is now configured into locking latch
Includes FIME Group Enhanced Fire Control Group
Includes FM-922EUS, the Enhanced Fire Control Group (FCG) for AK- and RPK-based rifles. FIME's Enhanced FCG includes a single-hook trigger, hammer, disconnector, disconnector springs.
FIME’s Enhanced Fire Control Group delivers shortened trigger travel with an extremely smooth and light trigger pull. To prevent lever misfires, the disconnector face makes full contact with the hammer. Further, the disconnector is engineered with an elongated tail, which makes a full stop on the rear trigger guard rivet and the hammer stop prevents the hammer from slamming on the trigger. With these two designs functioning together, it eliminates the “trigger slap” found in competing products.
