| |
|
|
K-VAR Corporation
Welcome to K-VAR Corporation
|
PRICE MATCHING PROGRAM
|
When it comes to superior parts and service, K-VAR has been the proud leader for the past 15 years in the firearm industry. We at K-VAR strive to do the best to satisfy you, our customers, by providing the highest quality parts and exceptional service. We know that a satisfied customer is a lifetime loyal customer. With you in mind we plan our daily operations. And now, to top it off, we are doing everything possible in order for you, our loyal customers, to receive the best prices possible in the retail market on all parts and accessories offered through K-VAR.
Effective immediately, K-VAR WILL MATCH ANY ADVERTISED PRICE!!!!!!
It is that simple, show us a lower, currently effective advertised price for the same item by any company and we will match it.
Rules and Conditions Apply
|
|
|
|
| PLEASE
NOTE |
|
Important Notice: Our Mailing Address has changed: K-var Corporation, 3300 S. Decatur Blvd., # 10601, Las Vegas, NEVADA 89102. Please make a note of it!!!
|
|
|
|
|
| NEW
FEATURED ITEMS |
|
Please make sure to check out our newest products for Saiga Conversion:
SGL10L
USA
Market price: $120.00
Our price: $79.99 (Save 33%)
Description: Saiga conversion kit for Arsenal, Inc.’s SGL10 rifle. Includes all the necessary parts to turn your SGL10 to a standard full stock AK rifle.
SGL10W
USA
Market price: $120.00
Our price: $79.99 (Save 33%)
Description: Saiga conversion kit for Arsenal, Inc.’s SGL10 rifle. Includes all the necessary parts to turn your SGL10 to a standard full stock AK rifle.
|

|
|
No need to compromise anymore on the quality and reliability of your magazine. As always, Arsenal Inc. of Nevada did what no one in the Firearm industry dared to do. Using the Arsenal of Bulgaria M-47W magazine body and the US made follower and Butt plate Combination, we came up with a unit indisputably the best quality 7.62x39 magazine on the market. The US made follower and the US made Butt plate are (2) components for your 922r requirements. These two units have proven themselves thru many tests to be of the highest quality and the best technology ever used.
We are proud to introduce the M-47W2US magazine for only $29.99.
MA7-004U U.S. made Floor Plate and MA7-001UB U.S. made Follower are also sold separately.
Also sold:
MA7-0014BU6 -
(6) of the MA7-004U and (6) of the MA7-001UB
MA7-0014BU -
(1) MA7-004U and (1) MA7-001UB
MA7-004U6 - (6) of the MA7-004U |
 |
To order your RPK-185B Stock Set with this Great Introductory Price of $129.99,
or the Brand New AK-126B Multifunction Bayonet for just $79.99,
or the MK-001 magazine for Makarov only $39.99.
|
Order Your AK-141US Now!
Please check out our Makarov section for a load of new products!
|
|
|
|
|
| FEATURED PRODUCTS |
|
We at K-Var Corp. are very excited to welcome yet another high quality product from Arsenal of Bulgaria.
Introducing the M-74B45, the new 45-round AK-74 magazine (5.45x39 caliber). The M-74B45 is made with the same exceptionally high quality material and technology as the well-known M-47W. It incorporates the same waffle pattern for rigidness and longevity. A magazine in this popular caliber has never been available on the market with this new and improved designed. It has all the necessary metal internal components that set the Bulgarian magazines apart from others.
Friends, we feel very privileged to get our hands on this one of a kind magazine. Since the quantities are very limited, we are offering them to you, our loyal customers, first for only $69.99.
CLICK HERE TO ORDER
|
|
Once again, K-Var comes through with another exclusive product for you! We have heard from many owners of milled receiver rifles who wanted a US made, short Warsaw Pact length stock to put on their rifle. We have also heard from many who wished that their milled receiver rifle incorporated a trapdoor in their stock for a cleaning kit. We have listened and bring to you the best of both worlds!
We were pleasantly surprised to learn a few months ago that Arsenal, Inc. has been working on an intermediate length stock to meet military requirements for a stock to use with or without body armor. These requirements also included an improved trap door for a cleaning kit and an improved bind-free sling swivel.
Introducing Arsenal s latest innovation; A US made, intermediate length, milled receiver stock with a trapdoor for a cleaning kit! It is available only from your friends at K-Var.
Never before has a milled receiver, polymer stock been available with a cleaning kit trapdoor. The latest in a long line of Arsenal Inc. s cutting edge products is the best milled receiver stock money can buy, and we are very proud to bring it to you. It is loaded with unique features, while exhibiting superior form, function and execution.
The length of the stock is the perfect compromise between the Warsaw Pact length and the NATO length stock. It is 5/8 inches longer than the Warsaw Pact length stock and 5/8 inch shorter than the NATO length stock, so it is the perfect length for you!
CLICK HERE TO ORDER
|
|
Introducing new four-piece US made stock set in the new Desert Sand color. K-Var's popular 1.25'' extended NATO length stock set for stamped receivers is now available in Desert Sand color. The lower handguard features stainless steel heat shield. The buttstock is assembled with US made bind free sling swivel and features trap door and compartment for the cleaning kit.
CLICK HERE TO ORDER
|
|
U.S. made Desert Sand color solid polymer folder with U.S. made Desert Sand color upper and lower hand guards for stamped receivers, new design U.S. made Desert Sand color matte pistol grip, and stainless steel heat shield. The whole set counts as 3 U.S. made parts for sec. 922r compliance.
CLICK HERE TO ORDER
|
|
Arsenal has given us a very limited quantity of the folding stock that will come standard on their upcoming SLR-106 rifle! It is undetermined if we will be able to obtain more as most of them are earmarked for the new SLR-106 rifles. Act now, before they're all gone!
The most sought after folding stock for the AK series of rifles is now made in the U.S. and it is a work of art! Aa direct replacement for a Bulgarian skeleton folding stock with the 4.5mm pivot pin. Yes, your AKS-74 and AKS-74U can now sport a solid folder with minimal effort. One can now go from a skeleton folder to a solid folder and back again, almost as easily as you can replace a fixed stock! Best of all, this stock is U.S. made, so it counts as one U.S. part for sec. 922® compliance.
CLICK HERE TO ORDER
|
|
U.S. made ribbed Krinkov upper and lower hand guard sets for stamped & milled receiver Krinks have arrived and they are available only through K-VAR! We have very limited quantities for the unheard of introductory price of $142.99! The MSRP of these beautiful, unique and top quality Krinkov hand guards is $248.99. We have made only a few of these, and we may not have them in stock for long, so don’t delay! Regardless of future availability, they will definitely go up in price after the introductory period. ACT NOW!
These wonderful handguards will fit all of the 5.45x39.5, 5.56x45 and 7.62x39 caliber Krinkov rifles and kits based on the AKS-74U design.
CLICK HERE TO ORDER
|
|
U.S. made pistol grips distributed exclusively by K-VAR Corp., these pistol grips are a marked improvement over any AK pistol grips currently available to the shooter, builder or collector. Its greatest innovation, will be appreciated by those with receivers utilizing a grip reinforcement plate, such as those with folding stocks. The new pistol grip follows the contour of the grip reinforcement plate, so there will not be an unsightly gap between the pistol grip and the receiver. The washer for the grip screw is molded into the pistol grip itself, eliminating the need for unsightly external washers, and the high-tech polymer is thicker surrounding the washer, providing increased strength in that critical area.
Available in shiny black, matte black, shiny plum, matte plum and matte OD green, these pistol grips are designed to fit stamped receiver rifles.
CLICK HERE TO ORDER
|
|
|
| NEWS |
|
Do you want to boost your business’ profit and sales? Are you tired of inventory that never sells? Then, it’s time for you to become a part of K-Var’s winning team!
K-Var Corporation, the largest manufacturer and importer of high quality AK parts and accessories in the U.S.A., is giving you a unique opportunity to substantially increase your company’s income.
By becoming a wholesaler/reseller, you will be able to take advantage of discounts on today’s hottest selling and highly demanded items. Click Here to fill out an application.
If you are already a partner in our adventure towards financial freedom and a better future, we thank you for your support. We would also appreciate any input you have that would enable us to better our partnership.
For more information on how you can become a part of the K-Var team, Click Here Or Email us at support@k-var.com
|
|
|
|
| NEW ITEMS IN STOCK |
M-74G - Magazine Bulgarian, AK-74, 5.45x39.5 caliber, ribbed polymer, O.D. green color
CLICK HERE TO ORDER
|
|
M-74BP - Magazine Bulgarian, AK-74, 5.45x39.5 caliber, ribbed polymer, plum color
|
|
AKS-039 - Bulgarian canvas carrying case for AKS (paratruper), SLR-106F and SLR-106FR rifles.
|
|
M-47W40P - Bulgarian plum 40rd. 7.62x39 waffle pattern magazine. Limited Quantity!
|
|
M-47W40G - Bulgarian 40rd. 7.62x39 waffle pattern magazine. Limited Quantity!
|
|
AK-129EG - East German bayonet scabbard rubber insulator .
|
|
|
|
| ATTENTION |
|
All customers automatically receive a 2% discount on all items purchased online. Sign up as a member of the MIG/ETA forum and have a chance to earn up to a 12% discount on all your online purchases. MIG/ETA forum members may also have a chance to qualify for additional discounts, package deals, and special prizes.
Click Here to visit the MIG/ETA forum.
|
|
|
|
| ALL NFA RULES APPLY |
|
Check local, state and federal laws. Special federal permission or licensing may be required. Contact BATF for clarification concerning modifications.
|
|
|
|
 |
|
|
|
|
|