Designed for volume production, the Lee 6-Cavity Bullet Mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are CNC machined for unmatched roundness and size control. Lee 6-Cavity molds come with a cam operated, hard-anodized sprue plate which is held tightly with tempered spring washers at each end. Weights given are Lee's weights with suggested alloy; actual weight may vary due to alloy mixture used. Handles ARE NOT included (#117-892).
Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity, reducing the diameter of the bullets cast from the treated mold. Instead, Lee Precision recommends smoking the mold with a wooden match, beeswax candle or a butane lighter as described in their provided bullet mold instructions.
- Rust resistant aluminum blocks
- Lathe bored blocks with steel bushings and alignment pins
- Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
- Material: Aluminum
- Capacity: 6
- Diameter: 0.401
- Bullet Style: Truncated Cone
- Handle Included: No
- Gas Check: No
- Bullet Weight: 175 Grains
- Mold Caliber: 40 S&W, 10mm Auto
4/25/2018 9:13 PM
Was this review helpful?